Heute früh habe ich gesehen, dass es eine neue Version vom London Architekt gibt (das ärgerliche Programm zu meinen Digitalcontrollern). Und was sehe ich noch?
Hier die Auflistung der Neuigkeiten. Bitte Fettdruck beachten.
Gruß
David
Hier die Auflistung der Neuigkeiten. Bitte Fettdruck beachten.
Additions
Added Digital Input Card support.
Added Digital Output Card support.
Added VPN (Virtual Private Network) support. Static routes over VPN’s can be added in the File Preferences.
Added a property of the Text Indicator to block mouse messages from passing through the Text Indicator when the Text Indicator is on.
Added Logic Timed Delay object.
Added right mouse context menu on rack list to switch between audio and logic, and for selection of devices.
Graphical and control objects on views can be locked so as not to be selected.
Added screen guidelines to control panels. These can be set up in File Preferences.
Removed the cross mark when in operate mode for graphical objects which had no image referenced.
Added warning at startup when initialisation is taking longer than expected.
Added warning when suggested device number limits within design files are exceeded.
Added definable border colour to text box control.
Added 'fibre' wire type to .dev file definition.
New version of D.I. message tool. Can now show incoming bytes and ACK's.
Changes
Version numbering scheme changed.
Made zone input and output objects resizable horizontally.
Radio links now only allowed on button controls.
Removed gallery 'clone' option.
Default contrast setting of BLU devices adjusted.
HiQnet address in the 'Modify Device Settings' dialog is now displayed and edited in hexadecimal.
BLU-10 setup page now closes when first adding the device to the design.
LA network device name setting now limited to 64 chars.
You can now double-click entries in the Serial Trigger table to edit them.
Corrections
Fixed daylight savings information not being read back in from a loaded design file.
Fixed design file security settings being corrupted when the control page assigned to be the Start Page was deleted.
Fixed configuration window not being displayed when a compiler error in the Compiler Report window was double-clicked.
Fixed crash when the same device was quickly rebooted twice from the network window.
Fixed Parametric EQ not updating status of new bands.
Fixed Gallery modify not updating the design file if the design file had previously been saved.
Fixed saving design file removing gallery items incorrectly from the design file causing possible design file corruption.
Fixed new Event Log events which have not been read from being unreadable if the design was closed without them being read.
Fixed device names in the Event Log from being corrupted when devices in the design file were compacted as the design file was saved.
Static routes over different subnets now work.
Fixed synchronisation issue with FDS-334 devices.
Fixed problem with recurring events in the Calendar logic object.
Fixed crash when dragging a device into your design from the network just as the device goes offline.
Now checks for current firmware in devices before attempting to run device settings dialog.
Stopped crash on shutdown caused by adapters set to i.p. address 0.0.0.0.
Fixed master pages not being shown under certain conditions.
Fixed FDS-device channel number not being displayed correctly above the device on the system view.
Newly created configurations now accurately reflect the current card set-up of the device.
Time zone default in LA now set correctly from the setting in Windows.
Fixed warning dialog about duplicate transmission bundles coming up when it shouldn't do.
Fixed bug where edited labels on source selectors could become offset from their proper values.
Fixed crash when dragging a device from the network view as it goes offline.
Multi-faders now cannot be 'nudged' downwards past their allowed minimum.
BLU-10 animation simulation now works
Fixed problem with goodbye messages not going out if multiple adapters are selected.
Devices now less likely to temporarily drop offline during large preset recalls.
Crown amps could sometimes stop responding when parameter synced with LA. This has been fixed.
Sometimes devices wouldn't be prompted to reload when related objects in other devices were deleted. This has now been fixed.
Firmware Specific Changes
Optimised logic processing CPU usage.
Optimised preset recall across multiple devices.
Raw messages setting SV values are now range checked.
BSS Audio 2006
Added Digital Input Card support.
Added Digital Output Card support.
Added VPN (Virtual Private Network) support. Static routes over VPN’s can be added in the File Preferences.
Added a property of the Text Indicator to block mouse messages from passing through the Text Indicator when the Text Indicator is on.
Added Logic Timed Delay object.
Added right mouse context menu on rack list to switch between audio and logic, and for selection of devices.
Graphical and control objects on views can be locked so as not to be selected.
Added screen guidelines to control panels. These can be set up in File Preferences.
Removed the cross mark when in operate mode for graphical objects which had no image referenced.
Added warning at startup when initialisation is taking longer than expected.
Added warning when suggested device number limits within design files are exceeded.
Added definable border colour to text box control.
Added 'fibre' wire type to .dev file definition.
New version of D.I. message tool. Can now show incoming bytes and ACK's.
Changes
Version numbering scheme changed.
Made zone input and output objects resizable horizontally.
Radio links now only allowed on button controls.
Removed gallery 'clone' option.
Default contrast setting of BLU devices adjusted.
HiQnet address in the 'Modify Device Settings' dialog is now displayed and edited in hexadecimal.
BLU-10 setup page now closes when first adding the device to the design.
LA network device name setting now limited to 64 chars.
You can now double-click entries in the Serial Trigger table to edit them.
Corrections
Fixed daylight savings information not being read back in from a loaded design file.
Fixed design file security settings being corrupted when the control page assigned to be the Start Page was deleted.
Fixed configuration window not being displayed when a compiler error in the Compiler Report window was double-clicked.
Fixed crash when the same device was quickly rebooted twice from the network window.
Fixed Parametric EQ not updating status of new bands.
Fixed Gallery modify not updating the design file if the design file had previously been saved.
Fixed saving design file removing gallery items incorrectly from the design file causing possible design file corruption.
Fixed new Event Log events which have not been read from being unreadable if the design was closed without them being read.
Fixed device names in the Event Log from being corrupted when devices in the design file were compacted as the design file was saved.
Static routes over different subnets now work.
Fixed synchronisation issue with FDS-334 devices.
Fixed problem with recurring events in the Calendar logic object.
Fixed crash when dragging a device into your design from the network just as the device goes offline.
Now checks for current firmware in devices before attempting to run device settings dialog.
Stopped crash on shutdown caused by adapters set to i.p. address 0.0.0.0.
Fixed master pages not being shown under certain conditions.
Fixed FDS-device channel number not being displayed correctly above the device on the system view.
Newly created configurations now accurately reflect the current card set-up of the device.
Time zone default in LA now set correctly from the setting in Windows.
Fixed warning dialog about duplicate transmission bundles coming up when it shouldn't do.
Fixed bug where edited labels on source selectors could become offset from their proper values.
Fixed crash when dragging a device from the network view as it goes offline.
Multi-faders now cannot be 'nudged' downwards past their allowed minimum.
BLU-10 animation simulation now works
Fixed problem with goodbye messages not going out if multiple adapters are selected.
Devices now less likely to temporarily drop offline during large preset recalls.
Crown amps could sometimes stop responding when parameter synced with LA. This has been fixed.
Sometimes devices wouldn't be prompted to reload when related objects in other devices were deleted. This has now been fixed.
Firmware Specific Changes
Optimised logic processing CPU usage.
Optimised preset recall across multiple devices.
Raw messages setting SV values are now range checked.
BSS Audio 2006
David
Kommentar